Diagram of the 2kW low-glare infrared heater throwing heat across an 8-20 m² outdoor area

2kW Infrared Heater with Timer Control

A wall-mounted infrared patio heater with a low-glare tube, hire from £80. It bolts to any solid wall or beam, runs off a standard socket and shrugs off the rain, which makes it the heater we reach for when a stand or shelter has something solid to fix it to.

Heat where a pole-clamped heater can't go

This is the wall-mounted cousin of our gazebo heaters. Those clamp round a centre pole; this one fixes to a wall, a beam or the upright of a marquee frame with a bracket that tilts on an Allen key, so it suits smoking shelters, bar servery areas, covered walkways and stands with a solid wall to work with. It is a Trotec IR 2010 - a 2,000-watt short-wave radiant heater with an aluminium body that weighs 2kg.

The tube is the low-glare kind, cutting the visible red light by around 80% against a standard infrared lamp while keeping the heat, and Trotec rates it for roughly 6,000 operating hours. Like the pole-mounted heaters, it warms people and objects directly, so the heat lands the moment it switches on and an open door or side panel doesn't take it with it. Nothing spins and no air moves through it either, so it doesn't stir dust up - worth knowing if your crowd includes people with allergies.

Get a Quote
The 595mm-wide wall-mounted infrared heater with its glowing low-glare tube
The low-glare tube throws heat without the red glow older patio heaters are known for.
Heater hire
From £80
Heating power
2,000W
Rainproof housing
IP65
Area it covers
8-20 m²

Specs

  • Trotec IR 2010, 2,000W heating capacity
  • Low-glare short-wave infrared tube, approx. 6,000 operating hours at 80% light reduction
  • 220-240V mains, 50/60Hz, CEE 7/7 plug on a 1.7m cable
  • IP65 - water-jet-proof and dustproof from all directions
  • 165 x 595 x 105mm, 2.0kg aluminium body
  • Adjustable tilt bracket, wall-mounted

Where it mounts and what it needs

  • Any solid wall or beam, tilted to suit the space
  • At least 1.8m above the floor, with 50cm clear all round
  • Its own 13-amp socket - the switch-on surge will trip a line shared with other kit
  • Nothing covering the body while it runs

Wall-mounting is the whole point of this heater, so if your shelter is a pop-up gazebo with a centre pole and no wall, the pole-clamped heaters are the ones that fit.

Where it gets used

  • Outdoor Exhibition Stands

    Warmth for covered stands and pitches through the winter show calendar

  • Smoking Shelters

    Keeps the areas venues have to leave usable all year

  • Bars and Hospitality

    Heat over servery areas and outdoor seating under canvas

  • Entrances and Queue Lines

    Takes the edge off doorways and queuing areas on cold mornings

  • Marquees and Gazebos

    Bolts to the frame of our marquees where a wall or beam is there to take it

  • Winter Trade Shows

    The colder months of the NEC and ExCeL calendar, mostly

Power and positioning

At 2,000W it draws most of a 13-amp socket, so plan one socket per heater and don't hang anything else off the same line - the brief switch-on surge is enough to trip a breaker that is already carrying kit. The CEE 7/7 plug sits on a 1.7m cable, so the socket wants to be within a metre or two of the mounting spot; where there's no mains at all we bring the power too, from a battery generator for quiet sites up to a diesel set for open ground. Our page on stand power and space explains how the socket sums work.

Mounting heights matter more than people expect: at least 1.8m above the floor with 50cm of clearance around the body, tilted down at the seating or standing area and never firing straight at a wall or a curtain. The kit comes with the screws, wall plugs and the Allen key for the tilt bracket - tell us what the wall is made of when you book and we'll make sure the right fixings go in the van.

Ours, from Rotherham

The heaters sit on the racking at our 25,000 sq ft warehouse between Sheffield and Doncaster, alongside the marquees and gazebos they usually travel with. The business dates back to 1999, and the best part of the catalogue, about 95% of it, is kit we own outright and maintain in-house, so what turns up is what you booked, cleaned, tested and packed by our own crew. Risk assessments and method statements emailed to you or your venue before the event.

The winter runs are the busiest part of the heater season - the vans are into NEC Birmingham and ExCeL London through the autumn and spring shows, and up to Harrogate Convention Centre for the winter fairs. If the heater is joining a bigger shelter booking, the marquees-and-furniture category lists everything that goes out with it.

Gallery

  • Diagram of the 2kW low-glare infrared heater throwing heat across an 8-20 m² outdoor area

    Manufacturer diagram showing the warmth throw across an 8-20 m² area

  • The 595mm-wide wall-mounted infrared heater with its glowing low-glare tube

    The 595mm body with the low-glare tube lit

  • IP65 and GS certification badges on the infrared heater's aluminium housing

    IP65 and GS certification badges on the aluminium housing

Heater questions

What can it mount to?

Any solid wall, beam or frame upright that takes screw fixings - the kit comes with screws, wall plugs and the Allen key for the tilt bracket. It is wall-mount only: there is no pole clamp on this model, so a pop-up gazebo with a centre pole needs the clamp-style gazebo heaters instead. Tell us what the surface is when you book and we'll make sure the right fixings go in the van.

How much power does it need on site?

It draws 2,000W from a standard 13-amp socket, arriving with a CEE 7/7 plug on a 1.7m cable. Because the switch-on surge will trip a breaker that is already carrying other equipment, each heater wants a socket of its own. Where the pitch has no mains at all we can quote a battery generator or a diesel set with the heater.

Can it stay out in the rain?

Yes - the housing is IP65 rated, which is water-jet-proof and dustproof from any direction, so it is built for uncovered outdoor areas as well as under canvas. The one rule is that nothing covers the body while it is running.

How much area does one heater cover?

The manufacturer's diagram rates it for roughly 8 to 20 square metres of outdoor area, depending on how open the space is and how cold the day is. Tell us what you are trying to keep warm - a servery, a queue line, a whole marquee - and the right number goes into the quote.

Related Products

A heated pitch usually wants light and shelter on the same order. The gazebo heaters clamp where this one can't bolt, the 3 x 3m and 3 x 4.5m black gazebos give it something to stand under, and festoon lighting keeps the pitch usable after dark. Everything below travels on the same van.

Hire the 2kW Infrared Heater

Send the dates, the venue and what you need to keep warm, and we'll come back with a quote for the heater and anything it's travelling with. If the wall or beam you have in mind is an unusual surface, describe it in the message and we'll confirm the fixings before the show.

Is it on grass or hard standing?
Do you have electricity on site (within 25 metres)?
Do you require the items to be staffed by us?
For event bookings
Are you VAT registered?